To Next PageTo Next Page
Need help?Do you have a question about the QSC HPR122i and is the answer not in the manual?
Defines warning symbols used in the manual to alert users to potential hazards and important information.
Instructions on using load-rated pick points for safely suspending loudspeakers.
Instructions on using the switch to enable or disable the 100Hz low-cut filter for different applications.
Outlines the terms and conditions of QSC's 3-year limited warranty for its products.
Defines warning symbols used in the manual to alert users to potential hazards and important information.
Instructions on using load-rated pick points for safely suspending loudspeakers.
Instructions on using the switch to enable or disable the 100Hz low-cut filter for different applications.
Outlines the terms and conditions of QSC's 3-year limited warranty for its products.
General| Type | Powered Loudspeaker |
|---|---|
| Configuration | 2-way |
| Rated Power | 1000 W |
| Frequency Response | 50 Hz - 20 kHz |
| Max SPL | 131 dB |
| HF Driver | 1.75 inch |
| Coverage Pattern | 90° x 60° |
| Input Connectors | XLR, 1/4 inch TRS |
| Output Connectors | XLR |
| Enclosure Type | Bass Reflex |
| Power | 1000 Watts |
| Woofer Size | 12" |
| LF Driver | 12 inch |
| Tweeter Size | 1.75" |
| Weight | 19.1 kg |
| Dimensions | 663 x 381 x 381 mm |
| Enclosure Material | Polypropylene |
