To Next PageTo Next Page
Need help?Do you have a question about the QSC HPR151i and is the answer not in the manual?
General| Configuration | 2-way |
|---|---|
| Enclosure Type | Bass Reflex |
| Frequency Response | 45 Hz - 20 kHz |
| Max SPL | 132 dB |
| Coverage Pattern | 90° x 60° |
| Output Connectors | XLR |
| Type | Powered Loudspeaker |
| Power Output | 1000 W |
| LF Driver | 15" |
| HF Driver | 1.75" |
| Amplifier Power | 1000 W |
| Input Impedance | 20 kΩ |
| Input Connectors | XLR/TRS Combo |
| Enclosure Material | Plywood |
Guidance on proper placement, pole mounting, and stacking for each model.
Details on using load-rated pick points for safe suspension of loudspeakers.
Specifies minimum clearance and orientation for proper amplifier cooling.
How to turn the powered loudspeaker on and off using the rocker switch.
Explains the function of the blue power indicator LED.
Recommended order for powering on and off audio systems to prevent pops.
Details for full-range models' XLR input and parallel output connectors.
Details for subwoofer models' dual XLR inputs and filtered/full-range outputs.
How to use the full-range line output for daisy-chaining.
Using full-range and 100 Hz low-cut outputs from subwoofers.
Guidance on setting gain for subwoofer and full-range speaker pairings.
How to enable or disable the 100 Hz low-cut filter on different models.
How to use the polarity switch for optimal bass response.
Physical dimensions and measurements for the HPR122i model.
Limits QSC's liability for damage from improper installation or use.
Details the 3-year warranty terms, coverage, and limitations.
