QSC KLA12 - Explanation of Symbols and Safety Instructions; Safety Terminology Definitions; Safety Symbol Meanings; General Safety Precautions

2
Attaching KLA12 Loudspeakers Together.
WARNING!: A single KLA array can consist of a maximum of two KLA181, or five KLA12, or two KLA181 and five KLA12
loudspeakers. The weight of any single array shall not exceed 480 lbs. (218 kg).
1. Makesurethattheleverslabeled"B"areup,andslides(1)aredownonbothsidesofthebottomloudspeaker(Figure 1).
2. PlaceoneKLA12ontopaKLA12.Nestthefourfeet(1)onthetopunitintothefeetreceptacles(2)onthebottomunit(Figure 2).Makesurethe
surfacesarealignedandparallel.Formorethanatwo-boxKLA12assembly,pleaseseetheKLA12UserManual.
3. Onthebottomloudspeaker,pushbutton"A".Slide(1)automaticallymovestoUp Position.Rotatelever"B"downtoLocked Position.
WARNING!: Make sure the loudspeakers are properly aligned.
WARNING!: Make sure the lever locks in the down, locked position. Lift array to confirm assembly.
— Figure 1 —
1
— Figure 2 —
Parallel
Parallel
1
2
— Figure 3 —
PUSH "A"
1
B
SLIDES UP
ROTATE DOWN