QSC KLA12 - Regulatory and Warranty Information; QSC Product Warranty Details

3
Install K Series M10 KIT in Integrated Suspension Points
TheKSeriesM10kitissoldseparatelyandavailablefromQSCAudio.
WARNING!: A single KLA array can consist of a maximum of two KLA181, or five KLA12, or two KLA181 and five KLA12
loudspeakers. The weight of any single array shall not exceed 480 lbs. (218 kg).
1. RemovetherubberplugFigure 4(1).
2. InstallthreewashersFigure 4(2)andthreeeyeboltsFigure 4(3).Tightenuntilsnug.
3. Continuetorotatetheeyeboltsuntiltheyreachthedesiredposition.Donotovertighten.
4. Suspendthearrayfromthesuspensionstructureusinganappropriatesling,cable,etc.
Other KLA12 Deployment
InadditiontotheM10rigginglistedabove,youcanuseaKLAAF12arrayframetosuspendanarray(Figure 5),youcandeployasingleKLA12
loudspeakeronstageforfrontllorlipllapplications(Figure 6),youcanpole-mountuptotwoKLA12sonaloudspeakerstand(Figure 7)orovera
KLA181orKW181(Figure 8).
— Figure 4 —
1
2
3
— Figure 5 —
— Figure 6 —
0˚
— Figure 7 —
-9˚
0˚
— Figure 8 —
Max pole length
36 inches
(914 mm)