QSC PowerLight Series User Manual

5
INTRODUCTION
EINFÜHRUNG
INTRODUCCIÓNA VANT-PROPOS
This manual covers these eight
PowerLight models. All are 2RU high
(3.5 inches, or 8.9 centimeters) and
weigh approximately 18 pounds (8.2
kilograms).
PowerLight 1.0 Two-channel
model; 500 watts/channel @ 2
ohms.
PowerLight 1.0
HV
"High-voltage"
two-channel model; 500 watts/
channel @ 4 ohms.
PowerLight 1.4 Two-channel
model; 700 watts/channel @ 2
ohms.
PowerLight 1.5
X
Bi-amp model; LF
channel: 1000 watts @ 2 ohms;
HF channel: 500 watts @ 2
ohms.
PowerLight 1.6
HVX
"High voltage"
bi-amp model; LF channel: 1100
watts @ 4 ohms; HF channel:
450 watts @ 4 ohms.
PowerLight 1.8 Two-channel
model; 900 watts/channel @ 2
ohms.
PowerLight 2.0
HV
"High-voltage"
two-channel model; 1000 watts/
channel @ 4 ohms.
PowerLight 2.4
MB
"Mono block"
single-channel model; 2400
watts @ 2 ohms.
Ce manuel traite des huit modèles
PowerLight ci-dessous. Ils occupent
chacun 2 espaces normalisés (3.5
pouces, ou 8.9 centimètres) et
pèsent approximativement 18 livres
(8.2 kilogrammes).
PowerLight 1.0 Modèle deux
canaux; 500 watts par canal @ 2
ohms.
PowerLight 1.0
HV
Modèle deux
canaux "haute tension"; 500
watts par canal @ 4 ohms.
PowerLight 1.4 Modèle deux
canaux; 700 watts par canal @ 2
ohms.
PowerLight 1.5
X
Modèle bi-
amplifié; canal LF: 1000 watts @
2 ohms; canal HF: 500 watts @ 2
ohms.
PowerLight 1.6
HVX
Modèle bi-
amplifié "haute tension"; canal
LF: 1100 watts @ 4 ohms; canal
HF: 450 watts @ 4 ohms.
PowerLight 1.8 Modèle deux
canaux; 900 watts par canal @ 2
ohms.
PowerLight 2.0
HV
Modèle deux
canaux "haute tension"; 1000
watts par canal @ 4 ohms.
PowerLight 2.4
MB
Modèle simple
canal "mono bloc"; 2400 watts
@ 2 ohms.
Este manual cubre estos ocho
modelos de amplificadores
PowerLight. Todos entran en dos
unidades de rack (3.5 pulgadas o 8.9
centímetros) y pesan aproximada-
mente 18 libras (8.2 kilos).
PowerLight 1.0 Modelo de dos
canales; 500 vatios por canal @
2 ohmios.
PowerLight 1.0
HV
Modelo "alto
voltaje" de dos canales; 500
vatios por canal @ 4 ohmios.
PowerLight 1.4 Modelo de dos
canales; 700 vatios por canal @
2 ohmios.
PowerLight 1.5
X
Modelo
biamplificado; canal de bajos
1000 vatios @ 2 ohmios; canal
de altos 500 vatios @ 2 ohmios.
PowerLight 1.6
HVX
Modelo "alto
voltaje" biamplificado; canal de
bajo 1000 vatios @ 4 ohmios;
canal de altos 450 vatios @ 4
ohmios.
PowerLight 1.8 Modelo de dos
canales, 900 vatios por canal @
2 ohmios.
PowerLight 2.0
HV
Modelo "alto
voltaje" de dos canales; 100
vatios por canal @ 4 ohmios.
PowerLight 2.4
MB
Modelo mono,
un solo canal de 2400 vatios @
2 ohmios.
Die Anleitung ist für acht
PowerLight-Verstärkertypen mit 2
Höheneinheiten (8,9 cm) und einem
Gewicht von ca. 8,2 kg.
PowerLight 1.0
Zweikanalverstärker, 500 W/
Kanal bei 2 Ohm
PowerLight 1.0
HV
„High Voltage“-
Zweikanalverstärker, 500 W/
Kanal an 4 Ohm
PowerLight 1.4
Zweikanalverstärker, 700 W/
Kanal an 2 Ohm
PowerLight 1.5
X
Bi-Amp-
Verstärker. Tieftonkanal 1000
W/2 Ohm, Hochton 500 W/2
Ohm.
PowerLight 1.6
HVX
„High Voltage“-
Bi-Amp-Verstärker. Tieftonkanal
1100 W/4 Ohm, Hochton 450
W/4 Ohm.
PowerLight 1.8
Zweikanalverstärker, 900 W/
Kanal an 2 Ohm
PowerLight 2.0
HV
„High-Voltage“-
Zweikanalverstärker, 1000 W/
Kanal an 4 Ohm.
PowerLight 2.4
MB
„Mono-Block“-
Einkanalverstärker. 2400 W/2
Ohm
All manuals and user guides at all-guides.com

QSC PowerLight Series Specifications

General

Channels	2
Input Impedance	20kΩ balanced, 10kΩ unbalanced
Cooling	Variable speed fan
Connectors	XLR, Speakon, binding posts
Protection	Thermal, short circuit