Need help?Do you have a question about the QSC Q-SYS QIO-ML4i and is the answer not in the manual?
General| Brand | QSC |
|---|---|
| Model | Q-SYS QIO-ML4i |
| Category | Network Hardware |
| Language | English |
Defines terms like WARNING and CAUTION for safety and equipment protection in the manual.
Explains the meaning of safety symbols like lightning with arrowhead and exclamation point.
Emphasizes using only authorized service stations for maintenance and repairs to avoid injury or damage.
Provides details on the product's expected life cycle, storage temperature range, and humidity limits.
Lists all included accessories and components for the QIO-ML4i model.
Lists all included accessories and components for the QIO-L40 model.
Introduces the Q-SYS QIO Endpoints Series, detailing the ML4i, L40, ML2x2, and GP8x8 models.
Clarifies that devices cannot provide daisy-chained power over Ethernet, requiring a 24 VDC supply.
Specifies that up to four devices can be powered by a compatible 24 VDC accessory power supply.
Details the front panel layout of the QIO-ML4i, including Power and ID LEDs and the ID Button.
Identifies rear panel connectors on the QIO-ML4i, such as LAN, Power, and Mic/Line Inputs.
Describes the front panel of the QIO-L40, highlighting Power LED, ID LED, and ID Button.
Details the rear panel connectors of the QIO-L40, including LAN, Power, and Line Outputs.
Explains the front panel features of the QIO-ML2x2, including LEDs and the ID Button.
Identifies rear panel connectors on the QIO-ML2x2, such as Mic/Line Inputs and Line Outputs.
Describes the front panel of the QIO-GP8x8, including Power LED, ID LED, and ID Button.
Details rear panel connectors of the QIO-GP8x8, including GPIO and LAN ports.
Lists the necessary components for mounting QIO Endpoints in a standard rack tray.
Provides instructions on how to insert and attach retaining clips for securing units in the rack tray.
Guides on sliding QIO Endpoints into clips and attaching blanking plates using screws.
To Next Page
