Why is there no Bluetooth output from my Qtx PAL12 Speaker System?
If your Qtx Speaker System has a lit power LED but no Bluetooth output, first ensure the volume output level on the sending device is adequate. Then, verify the sending device is correctly connected to the receiver. Also, check that the master volume and the media player volume (accessed by holding down the “Next” button) are not turned down.
What to do if Qtx PAL12 Speaker System power LED is lit but there is no USB/SD media output?
If your Qtx Speaker System's power LED is lit, but there's no USB/SD media output, ensure that the USB/SD/MMC contains mp3 or wma audio files. Also, verify that the master volume is not turned down.
What to do if Qtx PAL12 Speaker System power LED is lit but there is no FM tuner output?
If your Qtx Speaker System's power LED is lit, but there's no FM tuner output, check that stations are tuned in. If not, press the Play/Pause button. Also, make sure that the master volume and media player volume (adjusted by holding down the Next button) are not turned down.
What to do if Qtx PAL12 power LED is lit but there is no VHF output?
If your Qtx Speaker System has a lit power LED but no VHF output, try the following: - Check the AA batteries in the wireless microphone(s). - Ensure the wireless microphone is switched on. - Verify the VHF MIC VOL is not turned down.
How to fix no sound from external inputs on Qtx Speaker System?
If you're getting no sound from external inputs on your Qtx Speaker System, first check that the connecting leads are in good condition and properly connected. Then, ensure that both the MASTER and MIC VOL controls are turned up.
How to troubleshoot no output and no LEDs lit on Qtx Speaker System?
If your Qtx Speaker System has no output and no LEDs are lit, check that the POWER switch is turned on. Verify the battery is not fully drained. If the battery is flat, connect the mains power adapter.
General| Type | Passive PA speaker |
|---|---|
| Impedance | 8 Ohms |
| Sensitivity | 96dB |
| SPL @ 1W/1m | 96dB |
| Max. SPL | 120dB |
| Dispersion | 90° x 60° |
| Woofer Size | 12" |
| Tweeter Size | 1.4 inch |
| Connectors | 2 x Speakon NL4 |
To Next Page
