Qu-Bit Electronix Chord v2 User Manual

Internal Wavetable Banks were created from the AKWF waveforms available at:
AKWF - Github
For more information on creating, and loading additional waveform banks see User Waveta-
bles section below.
3. Waveform
Controls the selected waveform within the current bank.
Waveforms are blended smoothly into each other.
Synthesized banks are rendered internally, and the Wave Knob/CV adjusts a parameter.
Wavetable banks are smoothly interpolated between to create smooth transitions between
unique tables.
CV Range: -5V to +5V.
CV is added to current knob position.
4. Linear FM
FM input with Attenuator
5. Voicing
Controls the inversion, and voicing of the chord. Adjusting the octave distances between
the different notes in the chord.
See Appendix 1 for a list of all voicings.
CV Range: -5V to +5V.
CV is added to current knob position.
6. Quality
Controls the quality of the chord, setting the relationship between each of the third, fifth,
and seventh outputs in relation to the root.
See Appendix 2 for a list of all voicings.
9

Qu-Bit Electronix Chord v2 Specifications

General

Brand	Qu-Bit Electronix
Model	Chord v2
Category	Music Equipment
Language	English