5700 ACT Wood Stove
OPACITY
BURN RATES
• STARTING FIRE:
• HIGH:
After a wood load has been burning for 5 to 15 minutes on High to achieve the following burn rates
set the controls as listed below:
• MEDIUM HIGH:
• MEDIUM LOW
• LOW:
BLOWER OPERATING INSTRUCTIONS
Initial (cold) start-up:
High burn setting:
Medium or Medium-High burn setting:
Low burn setting
OPERATING INSTRUCTIONS (Cont’d)
CAUTION: DO NOT STORE WOOD CLOSER THAN THE REQUIRED CLEARANCES TO COMBUSTIBLE OF THE STOVE OR
WITHIN THE SPACE REQUIRED FOR LOADING AND ASH REMOVAL
WOOD SELECTION AND STORAGE
To Next Page
Loading...
