Quadra-Fire 820-0721 - Serial Number Label Location; Clearances to Combustibles

5700 ACT Wood Stove


R

CLEARANCES TO COMBUSTIBLES (UL AND ULC)



D
BACKWALL / SIDEWALL




CORNER INSTALLATION


*
90° OFF TOP
UP & OUT CEILING
CLEARANCE
STOVE TO CEILING
CLEARANCE

D
ALCOVE TOP VIEW
MINIMUM CLEARANCES TO COMBUSTIBLE MATERIALS In Inches and (Millimeters)
NOTE: All “A”, “C” and “F” Dimensions are to the inside diameter of the ue collar.
   D    
INSTALLATION: Full Vertical OR Horizontal with 2 foot minimum vertical Off Stove Top
SINGLE WALL PIPE  8  1 2 1 1156)  *
DOUBLE WALL PIPE  5  1 2 1 1156) 
INSTALLATION: 90
o
ELBOW OFF TOP OF STOVE THROUGH BACKWALL
DOUBLE WALL PIPE  5  1 2 1 1156) 
INSTALLATION: ALCOVE inchlisted Double Wall air insulated connector
pipe    listed    , or a    
 be   a    depth  lcove shall be no  than
)  a  height o   to top o unit, and the 
clearances
DOUBLE WALL PIPE  6  1   1156)
**
*
NFPA MINIMUM CLEARANCES - NOT TESTED
** SEE PIPE MANUFACTURERS CLEARANCES - NOT TESTED

A
B
ALCOVE SIDE VIEW
SERIAL NUMBER / SAFETY LABEL LOCATION:
ON BACK OF STOVE