3 09/207074-803C
Model CAB50-C
Laboratory Intertek
Report No. 100358108PRT-005
Type
Solid Fuel Room Appliance/Pellet Fuel
Burning Type
Standard
ASTM E1509-04 and ULC S627-00 Room
Appliance Pellet Fuel Burning type and
(UM) 84-HUD,
Mobile Home Approved.
1 Important Safety Information
A. Appliance Certication
NOTICE: This installation must conform with local codes. In the absence of local codes you must comply with the
ASTM E1509-04, ULC S627-00 and (UM) 84-HUD.
C. BTU & Eciency Specications
This pellet appliance needs periodic inspection and repair for proper operation. Consult the owner’s manual for further
information. It is against federal regulations to operate this pellet appliance in a manner inconsistent with operating
instructions in this manual.
EPA Certication
Number:
Number: N/A
EPA Certied
Emissions:
1.0 grams per hour
*LHV Tested Eciency: 69.5%
**HHV Tested Eciency: 65.1%
***EPA BTU Output: 7,500 to 36,600 per hr
****BTU Input: 13,100 to 49,900 per hr
Vent Size: 3” or 4” Type “L” or “PL”
Hopper Capacity: 120 lbs.
Fuel Premium Wood Pellets
* Weighted average LHV (Low Heating Value) eciency
using data collected during EPA emissions tests in
accordance with the requirements of CSA B415.1.
** Weighted average HHV (High Heating Value) eciency
using data collected during EPA emissions tests in
accordance with the requirements of CSA B415.1.
*** A range of BTU outputs calculated using HHV
eciency and the burn rates from the EPA tests.
**** Based on the maximum feed rate per hour multiplied
by approximately 8600 BTU’s which is the average BTU’s
from a pound of pellets.
The CAB50-C is Certied to
comply with 2020 particulate
emission standards.
Model CAB50-C
Laboratory OMNI Test Laboratories, Inc.
Report No. 0061PS085E
Standard
Method 28R, ASTM E1509-04 and
ASTM E2779
Can be found at:
www.quadrare.com/about-us/epa-certication
B. Appliance Emissions Certication
To Next Page
Loading...
Need help?
General
