Operating Instructions & Tips
• The xed blade teeth have extended points with rounded ends to reduce the chance of injury in case
of accidental contact.
• The xed blade is longer than the moving blade to guard against kickback should you inadvertently
make contact with a wall or fence.
• The rear handle trigger switch and front handle bar switch must be operated together to start the
motor. This ensures that both hands are used to control the trimmer.
• If either of the two switches is released, the tool is designed to stop rapidly.
Before starting your hedge trimmer remove the blade sheath.
• To switch on, press both the trigger switch
2
and the bar switch
3
at the same time.
• To switch OFF, release either switch.
Safety Features
Starting and Stopping
6
2 3
To Next Page
Loading...
Need help?
General
