Pruning
Lubrication
General Inspection
Operating Instructions & Tips
Your hedge trimmer is versatile. It can also be used for frequently pruning new growth on a wide variety
of shrubs and hedges in your garden to encourage even growth and attractive shapes.
WARNING! Switch o and remove the battery before carrying out any maintenance on the tool.
After each use, clean the blades and lightly lubricate with general purpose oil or spray lubricant.
Regularly check that all the xing screws are tight. They may vibrate loose over time.
Maintenance
Maintenance
• Store the tool, instruction manual and accessories in a secure, dry place. In this way you will always
have all the information and parts ready on hand.
• Keep the tool’s air vents unclogged and clean at all times.
• Remove dust and dirt regularly. Cleaning is best done with compressed air or a rag.
• Never use caustic agents to clean plastic parts.
CAUTION! Do not use cleaning agents to clean the plastic parts of the tool. A mild detergent on a damp
cloth is recommended. Water must never come into contact with the tool.
To Next Page
Loading...
Need help?
General
