Cutting
Operating Instructions & Tips
• Assume a secure position, using two hands to hold the trimmer and switch on.
• Trim both sides of the hedge, starting at the bottom. This prevents cuttings falling into the area yet to
be cut.
• Pass the blade lightly through the surface of the hedge. Do not attempt to cut too deep.
• Trim the top of the hedge.
• For older hedges that require cutting back substantially, use pruning shears to cut the thicker
branches and then nish the job with the hedge trimmer.
WARNING! Do not let the blade come into contact with fencing wire or any other object that could
damage it.
8 9
To Next Page
Loading...
