3
6
1313
14
2
14
3
1
3
6
2
1
• Insert the each lower bar
3
into the slot in the housing
6
• Use the 2 screws
13
provided to lock each bar into position in the deck.
• Fix the top curved handle
1
section to the lower bars
3
. Use the bolts
14
and wing nut fasteners
2
provided. There are two possible height positions. Chose the one most suitable to the operator’s
height.
• Clip the cable to the handle bar with the cable clamp
8
provided.
When the two wing nuts are loosened, the handle can be folded (Fig.4 ) for easy storage. Ensure the power
cable is not caught between the folding sections.
Step 1 - Handle Assembly
Assembly
2
3 4
3
3
6
13
13
6
14
2
8
2
3
1
14
1
To Next Page
Loading...
Need help?
General
