Qualcast M2E1232M - Step 3 - Fitting; Removing the Grass Collector

14
Customer Helpline 08456 400 800
Step 3 - Fitting / Removing the Grass Collector
Assembly
• Lift the deector guard
7
• Place the grass collector
4
on the mounting bracket at the back of the lawn mower. Ensure the grass
collector ts snugly against the mower deck.
• Lower the deector guard
7
onto the grass collector
4
– a spring tensioner holds it in place.
• To remove the grass collector
4
, lift the deector guard
7
and unhook the grass collector from the
mounting bracket. Ensure the deector returns down to its original position.
8
7
4
17
6