Before you begin to mow, check to ensure that the blade is not blunt and that
none of the fasteners are damaged. To prevent any imbalance, replace blunt
and/or damaged blades. To carry out this check, first switch off the motor and
pull out the power plug.
Switching ON and OFF
F
- Connect the equipment to your power supply socket.
- Before switching on, ensure that the equipment is not in contact with any
foreign objects.
- To switch on, press the safety lock-off button (10) on the handle , then
activate the start/stop switch lever (12). Release the release button (10).
- To switch off, release the start/stop switch lever (12).
After switching off the equipment, the blade may continue to
turn for several seconds. Do not touch the moving blade.
There is a risk of serious injury.
G
Hook the mains cable through the cable strain-release (11) to reduce the
strain on the cable fitting as you mow
To Next Page
Loading...
