Trouble Shooting
Problem Possible Cause Corrective Action
No power at mains
socket
Check the switch,
socket, cable, wire and
have any repairs
carried out by an
electrician
Defective on/off switch
Worn carbon brushes
Defective motor
Repair by a qualified
technician required
Mower does not start
Grass too long
Set at a higher cut
setting. Lift the front
wheels slightly by
pressing down on the
handle bar.
Motor stops Blade is blocked Remove blockage
Cut height too low Set a higher cut height
Blade blunt
Sharpen or replace the
blade
Blade area blocked Remove blockage
Untidy finish, motor
labours
Blade assembled
incorrectly
Install the blade
correctly
Blade blocked by grass Remove blockage
Blade fails to turn
Blade screw loose
Tighten the blade
screw
Blade screw loose
Tighten the blade
screw
Strange noises, rattling
or vibrations
Blade damaged Replace the blade
To Next Page
Loading...
