1110
Customer Helpline 01904 727500
www.gardenservicecentre.co.uk
Customer Helpline 01904 727500
www.gardenservicecentre.co.uk
Operating the Lawnmower
Step 2 - Starting the Engine (continued)
2b Start/Stop Bar Activation
Pull the Start/Stop bar towards you.
2c Key start.
1. Turn the ignition key fully to the right.
2. As soon as the motor starts running, release the key (it turns automatically).
CAUTION!
Every start, ignition time should be less than 5s. Long time ignition will damage the electric motor.
If no starting rst time, please try 3~5 times.
2b
2c
INSERT THE BATTERY
PACK TO ENGINE
STOP/START-LEVER
CLOSED
KEY START PROPULSION-
LEVER CLOSED
1 2 3 4
Step 1 - Setting the Cutting Height
Operating the Lawnmower
WARNING!
- The blade can cause serious injury. Before adjusting the mower height, stop the engine and wait
for the mower blade to stop completely.
Step 2 - Starting the Engine
WARNING!
- Do not operate the machine in enclosed or poorly ventilated areas as the exhaust gas contains
toxic substances. Keep hands, feet, hair and clothing away from all the moving parts of the
machine. The exhaust and other parts of the machine will become hot during use. Make sure that
the blade is securely fastened before starting the engine.
1
2
1 Pull the lever towards the wheel, then move it forward or backward to adjust the cutting height.
2 Move it to any one of the 7 positions for the desired cutting height.
3 Return lever into securing plate.
NOTE! Never use the lowest cutting height for the rst cut of the season or in drought conditions.
Only about one thirds of the grass height should be cut.
To Next Page
Loading...
