Need help?Do you have a question about the Qualitrol AKM 34/Gen2 OTI and is the answer not in the manual?
General| Category | Measuring Instruments |
|---|---|
| Type | Oil Temperature Indicator (OTI) |
| Contact Type | SPDT |
| Measurement Principle | Bimetallic |
| Output Signal | Relay Contacts |
| Power Supply | None required for mechanical version |
| Housing Material | Aluminum |
| Measurement Range | -20°C to 160°C |
| Operating Temperature | -40 to +80 °C (-40 to +176 °F) |
Details on how to properly install the instrument, including handling precautions.
Instructions for verifying the instrument's calibration against a known temperature.
Guidance on how to adjust the instrument's factory-set switches.
Instructions for adjusting the differential setting of the optional adjustable switches.
Steps to adjust the matching resistance using a graph and multimeter for correct setting.
Two methods for setting the matching resistance for accuracy.
Recommended installation procedures for the TD Transmitter.
To Next Page
