Need help?Do you have a question about the Qualitrol AKM OTIWTI and is the answer not in the manual?
General| Brand | Qualitrol |
|---|---|
| Model | AKM OTIWTI |
| Category | Measuring Instruments |
| Language | English |
Instructions for setting the differential for optional adjustable switches, including adjustment screw and test lever usage.
Steps to adjust matching resistance using a multimeter and the temperature gradient graph, referencing section 5.4 for TD50/5A.
Graph showing temperature gradient versus heating current for WTI with external 1A and 5A matching units.
Guideline for wiring the Double Gradient option, explaining potentiometer connections and jumper settings for gradient activation.
Information on utilizing the 5 Amp internal CT option for winding temperature simulation current input.
Two methods (A and B) for setting matching resistance based on required accuracy, involving ohmmeters and specific jumper configurations.
Details and dimensions for the seismic mount, suitable for high amplitude, low frequency conditions.
Details and dimensions for the universal mount, featuring an adaptor plate for various mounting bolt patterns.
Details and dimensions for the anti-vibration (standard) mount, providing the highest instrument isolation.
Guidance on maintaining IP 65 protection class, including desiccant capsule replacement for condensation control.
Information on rubber damper maintenance for seismic and universal mounts, including expected life and replacement advice.
Technical specifications for the Gen2 transmitter, covering housing, supply voltage, output signal, accuracy, and isolation standards.
Recommendations for installing the transmitter, emphasizing shielded cables and referencing wiring figures for specific models.
To Next Page
