Need help?Do you have a question about the Qualitrol AKM 35/Gen2 WTI and is the answer not in the manual?
Guides on adjusting alarm set points and switch differential settings, including a test lever operation.
Specifies how to wire potentiometers to terminal blocks and connect the CT input for the Double Gradient option.
Describes Method A for setting matching resistance, focusing on ease of use.
Describes Method B for setting matching resistance, emphasizing maximum accuracy.
General| Display | LCD |
|---|---|
| Mounting | Panel mount |
| Protection Class | IP54 |
| Application | Transformer temperature monitoring |
| Input | Temperature sensor input |
| Output | 4-20 mA |
| Storage Temperature | -40 °C to 85 °C |
| Humidity | 95% RH non-condensing |
| Power Supply | 24 V DC |
| Dimensions | 100 mm |
| Communication Interface | Modbus RTU |
| Spectral Range | Not applicable |
| Focus | Not applicable |
| Emissivity Adjustment | Not applicable |
To Next Page
