Chapter 3
System Installation
Processor Installation
Processor Handling
Carefully follow the steps below in order to prepare the CPU for installation:
1. Remove processor from packaging.
2. Handle the CPU by grasping the substrate edges only with thumb and
forefinger.
CAUTION
DO NOT TOUCH PROCESSOR CONTACTS TO PREVENT
DAMAGING THE CPU.
Installing the CPU
Carefully follow the steps below in order to install the CPU:
1. Check and confirm that you are installing the correct CPU type.
2. Using a screwdriver, disengage (open) the socket actuator, as shown in figure
below.
Figure 5 Disengage the socket actuator
To Next Page
Loading...
