Chapter 5
Driver Installation
If your KEEX-4030 does not come with an operating system pre-installed, you will
need to install an operating system and the necessary drivers to operate it. After you
have finished assembling your system and connected the appropriate power source,
power it up using the power supply and install the desired operating system.
You can download the drivers for the KEEX-4030 from the Quanmax website at
www.quanmax.com
and install as instructed there. For other operating systems,
please contact Quanmax.
NOTE
You have to install Windows XP/2K HD Audio Service Pack before you
start graphic driver installation.
Please visit http://support.microsoft.com/kb/888111
for more
information.
NOTE
When the system reboots without connecting the CRT, there might be no
image on screen when you insert the CRT/VGA cable. Please
pressing <Ctrl>+<Alt>+<F1> simultaneously to show the image on screen.
To Previous Page
Loading...
