Quantum CHECK POINT SPARK 1800 Series User Manual

Advanced Settings
Quantum Spark 1500, 1600 and 1800 Appliance Series R80.20.40 Locally Managed Administration Guide | 133
Hotspot Attribute Description
Prevent
simultaneous log-
in
The same user will not be allowed to login via hotspot portal from more
than one machine in parallel.
Table: Hotspot Attributes (continued)
IP Fragments
Parameters
Attribute
Description
Multiple
parameters
These parameters let you configure how the appliance handles IP
fragments.
It can either block fragmented IP packets or drop fragments when a
configured threshold is reached.
Select one of these options:
n
Forbid IP Fragments - Fragmented IP packets are dropped.
n
Allow IP Fragments - Fragmented IP packets are allowed if they do
not exceed a configured threshold. When selecting this option, you
can configure the maximum number of accepted incomplete packets.
You can also configure the timeout (in seconds) for holding
unassembled fragmented packets before discarding them.
Table: IP Fragments Parameters
IP Resolving Attributes Description
IP Resolving - IP Resolving
Activation
Enable/Disable IP Resolving logs enrichment.
IP Resolving - IP Resolving TTL The time (in seconds) for which the hostname resolution
is used.
Default is 3600.
Table: IP Resolving Attributes
IPS Additional
Parameters Attribute
Description
Max ping limit Indicates the maximal ping packet size that are allowed when the
'Max Ping Size' protection is active.
Non-standard HTTP
ports
Enable HTTP inspection on non-standard ports for the IPS blade.
Table: IPS Additional Parameters

Quantum CHECK POINT SPARK 1800 Series Specifications

General

Brand	Quantum
Model	CHECK POINT SPARK 1800 Series
Category	Network Hardware
Language	English