Managing System Services
Quantum Spark 1500, 1600 and 1800 Appliance Series R80.20.40 Locally Managed Administration Guide | 267
Managing System Services
The Users & Objects > Services page lists the system services configured in the system. In this page you
can add new services, edit services, and delete services.
You use service objects to easily define the different network protocols. This is usually with IP protocol and
ports (used by the TCP and UDP IP protocols).
These objects can be used to define your security policy, as well as policy based routing rules. Many service
objects are predefined with the system and cannot be deleted. Those predefined "system services"
represent the appliance's ability to perform deep inspection on those services for connectivity and security
reasons. The system services sometimes have additional configuration options.
To create a new service:
1. Click New.
2. In the Service tab, enter information in the fields that apply to the type of service you select. Note that
not all fields may show:
n
Name - Enter the service's name.
n
Type - Select the service type from the list:
l
TCP
l
UDP
l
ICMP - Select this option if it is necessary to represent a specific option within the ICMP
protocol. Note that this is an advanced option.
l
Other - Select this option to represent any IP protocol other than TCP or UDP.
n
Ports - Enter the port(s) if you selected Type - TCP or UDP. Enter a specific port number or
port range.
n
IP Protocol - Enter the IP protocol, if in the Type field you selected Other.
n
ICMP type and ICMP code - Enter the ICMP type and code that you want the service object to
represent as listed in RFC 792. This option is only relevant, if in the Type field you selected
ICMP.
n
Comments - Enter an optional comment.
n
Disable inspection for this service – Select this checkbox to disable deep inspection of traffic
matching this service. This option is only available for built-in services.
3. In the Advanced tab, enter information in the fields that apply to the type of service you selected. Note
that not all fields may show depending on the service type.
To Next Page
Loading...
Need help?
General
