Replacing Decommissioned Disks
in a Lattus Storage Node
Each Lattus Storage Node contains the following customer replaceable units (CRUs):
l 12 hard disk drives
l 2 power supplies
The instructions in this document describe how to replace decommissioned hard disk drives in a Lattus
storage node.
© 2017 Quantum Corporation. All rights reserved. Your right to copy this manual is limited by copyright law. Making copies
or adaptations without prior written authorization of Quantum Corporation is prohibited by law and constitutes a punishable
violation of the law. Artico, Be Certain (and the Q brackets design), DLT, DXi, DXi Accent, DXi V1000, DXi V2000, DXi
V4000, DXiV-Series, FlexTier, Lattus, the Q logo, the Q Quantum logo, Q-Cloud, Quantum (and the Q brackets design), the
Quantum logo, Quantum Be Certain (and the Q brackets design), Quantum Vision, Scalar, StorageCare, StorNext,
SuperLoader, Symform, the Symform logo (and design), vmPRO, and Xcellis are either registered trademarks or trademarks
of Quantum Corporation and its affiliates in the United States and/or other countries. All other trademarks are the property of
their respective owners. Products mentioned herein are for identification purposes only and may be registered trademarks
or trademarks of their respective companies. All other brand names or trademarks are the property of their respective
owners. Quantum specifications are subject to change.
6-68540-02 Rev A, March 2017
To Next Page
Need help?
General
