Quantum CHECK POINT SPARK 1800 Series User Manual

Working with the Firewall Access Policy
Quantum Spark 1500, 1600 and 1800 Appliance Series R80.20.40 Locally Managed Administration Guide | 168
To clone a rule:
Clone a rule to add a rule that is almost the same as the one that already exists.
1. Select a rule and click Clone.
2. Edit the fields as necessary.
3. Click Apply.
To edit a rule:
Note - For Access Policy rules, you can only edit the tracking options for automatically generated rules.
1. Select a rule and click Edit.
2. Edit the fields as necessary.
3. Click Apply.
To delete a rule:
1. Select a rule and click Delete.
2. Click Yes in the confirmation message.
To enable or disable a rule:
n
To disable a manually defined rule that you have added to the rule base, select the rule and click
Disable.
n
To enable a manually defined rule that you previously disabled, select the rule and click Enable.
To change the rule order:
1. Select the rule to move.
2. Drag and drop it to the necessary position.
Note - You can only change the order of manually defined rules.

Quantum CHECK POINT SPARK 1800 Series Specifications

General

Brand	Quantum
Model	CHECK POINT SPARK 1800 Series
Category	Network Hardware
Language	English