Quantum CHECK POINT SPARK 1800 Series User Manual

Defining Firewall Servers
Quantum Spark 1500, 1600 and 1800 Appliance Series R80.20.40 Locally Managed Administration Guide | 173
Step 4: NAT (when server is accessible from the Internet)
The server's configured IP address (x.x.x.x) is public - This option is only relevant if the Hide internal
networks behind the Gateway's external IP address checkbox in the Access Policy > NAT Control page
is cleared (see above for details). It means there are no NAT rules on the server.
When you complete the wizard, the server is added to the list of servers on the page and the automatically
generated access rules are added to the Access Policy > Firewall Policy Rule Base.
Note - This page is available from the Firewall and NAT sections on the Access Policy tab.

Quantum CHECK POINT SPARK 1800 Series Specifications

General

Brand	Quantum
Model	CHECK POINT SPARK 1800 Series
Category	Network Hardware
Language	English