Quantum CHECK POINT SPARK 1800 Series User Manual

Configuring Remote Access Users
Quantum Spark 1500, 1600 and 1800 Appliance Series R80.20.40 Locally Managed Administration Guide | 224
To configure remote access permissions for a user:
1. On the Remote Access Users page, click Add.
The New Local User window opens:
2. In the Remote Access tab, enter the:
n
User name.
n
Password.
n
Email.
n
Mobile phone number.
3. Select Remote Access permissions.
4. Click Apply.
To configure SSL VPN bookmarks:
1. Click Add > New Local User/Users Group/Active Directory Group > SSL VPN Bookmarks tab.
A new window opens.
2. Enter new bookmarks or select existing bookmarks.
Note - If you select Global bookmark, this bookmark is always shown.
3. Click Apply.
To edit a user or group:
1. Select the user or group from the list.
2. Click Edit.
3. Make the relevant changes and click Apply.
To delete a user or group:
1. Select the user or group from the list.
2. Click Delete.
3. Click OK in the confirmation message.
The user or group is deleted.

Quantum CHECK POINT SPARK 1800 Series Specifications

General

Brand	Quantum
Model	CHECK POINT SPARK 1800 Series
Category	Network Hardware
Language	English