Quantum CHECK POINT SPARK 1800 Series User Manual

Configuring Local and Remote System Administrators
Quantum Spark 1500, 1600 and 1800 Appliance Series R80.20.40 Locally Managed Administration Guide | 258
2. Add these lines in the vendor.ini file on the RADIUS server (keep in alphabetical order with the
other vendor products in this file):
vendor-product = Quantum Spark Appliance
dictionary = nokiaipso
ignore-ports = no
port-number-usage = per-port-type
help-id = 2000
3. Add this line in the dictiona.dcm file:
"@checkpoint.dct"
4. Add this Check Point Vendor-Specific Attribute to users in your RADIUS server user configuration
file:
CP-Gaia-User-Role = <role>
Where <role> allowed values are:
Administrator Role Value
Super Admin
adminRole
Read only
monitorrole
Networking Admin
networkingrole
Mobile Admin
mobilerole
Configuring a FreeRADIUS server for non-local appliance users
1. Create the dictionary file dictionary.checkpoint in the /etc/freeradius/ on the RADIUS
server.
Add these lines in the dictionary.checkpoint file:
#Check Point dictionary file for FreeRADIUS AAA server
VENDOR CheckPoint 2620
ATTRIBUTE CP-Gaia-User-Role 229 string
CheckPoint
ATTRIBUTE CP-Gaia-SuperUser-Access 230 integer
CheckPoint
2. Add this line in the /etc/freeradius/dictionary file
"$INCLUDE dictionary.checkpoint"
3. Add thisCheck Point Vendor-Specific Attribute to users in your RADIUS server user configuration
file:
CP-Gaia-User-Role = <role>
Where <role> is the name of the administrator role that is defined in the WebUI.

Quantum CHECK POINT SPARK 1800 Series Specifications

General

Brand	Quantum
Model	CHECK POINT SPARK 1800 Series
Category	Network Hardware
Language	English