Quantum CHECK POINT SPARK 1800 Series User Manual

Managing Network Objects
Quantum Spark 1500, 1600 and 1800 Appliance Series R80.20.40 Locally Managed Administration Guide | 274
To delete a network object:
1. Select the network object from the list.
2. Click Delete.
3. Click Yes in the confirmation message.
To filter for a specified network object:
1. In the Type to filter box, enter the name of the network object or part of it.
2. As you enter text, the list is filtered and shows matching results.
To add a new network object and bypass SSL inspection based on the host MAC address (locally
managed only):
1. Click New.
The New Network Object window opens.
2. For Type, select Device.
3. For Host MAC address, enter a custom value or select from the menu.
4. Select the checkbox for Bypass host with this MAC by SSL inspection.
5. Enter the Object name.
6. Click Apply.
Note - You can also do this on the Home >Active Devices page. Click Save as and select Device type
Network Object.

Quantum CHECK POINT SPARK 1800 Series Specifications

General

Brand	Quantum
Model	CHECK POINT SPARK 1800 Series
Category	Network Hardware
Language	English