Managing Clusters
Quantum Spark 1500, 1600 and 1800 Appliance Series R80.20.40 Locally Managed Administration Guide | 32
After the reboot:
n
The former active member is now the standby member.
n
The former standby member is now the active member.
To upgrade a cluster member manually:
1. On the Device > System Operations page, click Manual Upgrade.
The Upgrade Software Wizard opens.
2. Follow the Wizard instructions to upgrade the cluster member.
The upgrade process automatically reboots the member.
To see the status of each cluster member:
Go to Device > High Availability.
To Next Page
Loading...
