Managing Licenses
Quantum Spark 1500, 1600 and 1800 Appliance Series R80.20.40 Locally Managed Administration Guide | 44
If you are offline while configuring the appliance:
1. Browse to
Check Point User Center
.
2. Enter the appliance's credentials, MAC address, and registration key from the Home > License page.
3. After you complete the registration wizard, you are prompted to download the activation file.
Download it to a local location. This is needed for the next step.
4. In Home > License, click Offline.
The Import Activation File window opens.
5. Browse to the activation file you downloaded and click Import.
The activation process starts.
The region is set when the license is installed. The region determines the wireless frequency and
parameters, as the regulations vary according to region.
If you are using a trial license, only basic radio settings, are allowed in all zones. A warning that selected
wireless radio settings are not applied shows on the Summary page of the First Time Configuration Wizard
and also on the Device > License page. For more information on basic wireless radio settings, see
sk159693.
If you select a country and install a valid license, but the wireless region of the device does not match the
selected country, a warning message shows and you must edit the country information. When the country
and wireless region match, you see the full settings.
To Next Page
Loading...
Need help?
General
