Quantum CHECK POINT SPARK 1800 Series User Manual

Configuring the Local Network
Quantum Spark 1500, 1600 and 1800 Appliance Series R80.20.40 Locally Managed Administration Guide | 83
Configuration steps:
1. Disconnect a cable from one of the available physical interfaces on the appliance (in our example,
LAN4).
2. Assign a random IP address to this interface.
This can by a dummy IP address that must not be used in your internal networks.
3. Go to the Device > Advanced Settings page. See "Advanced Settings" on page125 .
4. Search for UserCheck Portal - Redirect Address
5. Select this attribute.
6. Click Edit.
7. Enter the same IP address you assigned to the dedicated interface (in our example, LAN4).
8. Click Apply.

Quantum CHECK POINT SPARK 1800 Series Specifications

General

Brand	Quantum
Model	CHECK POINT SPARK 1800 Series
Category	Network Hardware
Language	English