Quantum CHECK POINT SPARK 1800 Series User Manual

Configuring a Hotspot
Quantum Spark 1500, 1600 and 1800 Appliance Series R80.20.40 Locally Managed Administration Guide | 91
To prevent simultaneous login to the Hotspot portal:
1. Go to Device > Advanced Settings.
2. Select Hotspot.
3. Click Edit.
The Hotspot window opens.
4. Click the checkbox for Prevent simultaneous login.
5. Click Apply.
The same user cannot log in to the Hotspot portal from more than one computer at a time.
On the Active Devices page (available through the Home and Logs & Monitoring tabs), you can revoke
Hotspot access for connected users.

Quantum CHECK POINT SPARK 1800 Series Specifications

General

Brand	Quantum
Model	CHECK POINT SPARK 1800 Series
Category	Network Hardware
Language	English