Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-05 Rev B
April 2012
74 Network CLI Commands
Setting the Security
Banner
syscli --set securitybanner --txtfile <file-name>
This CLI allows the admin user to set the security banner for the system.
CLI Command Options:
• --set: Sets the security banner for the system.
• --txtfile: Name of the file containing the security banner's text.
Getting the Number of
Failed Login Attempts
syscli --getcount failedlogin --user <user_name> [--terse]
This CLI allows the user to get the number of failed login attempts preceding the
current login.
CLI Command Options:
• --getcount: Gets number of failed login attempts.
• --user: UserName
• --terse: if specified, only the number of failed login attempts will be
displayed in the output.
Network CLI Commands
The following sections describe the supported Network CLI commands:
• Adding Network Configurations
• Deleting Network Configurations
• Displaying Network Configurations
• Backing Up the Current Network Configuration
• Restoring a Network Configuration
• Displaying System Network Configuration
• Listing Network Interfaces
• Adding Throttle on the Source System
• Deleting Throttle on the Source System
• Listing Throttle States
• Setting Host and Domain Names and the DNS Search Path
• Editing the Network Configuration
• Adding a Static Route
• Deleting a Route From the System of Network Device
• Listing Static Routes
• Deprecated Network CLI Commands
To Next Page