Quantum DXi6900

Installing Components in the DXi6900 Node
Quantum DXi6900 Installation Guide 27
Option PCI Slot 4 PCI Slot 5 PCI Slot 7
101
102 2 x 16 Gb Fibre Channel
103 2 x 16 Gb Fibre Channel 2 x 16 Gb Fibre Channel
104 2 x 16 Gb Fibre Channel 2 x 16 Gb Fibre Channel 2 x 16 Gb Fibre Channel
105 2 x 10 Gb Ethernet *
106 2 x 10 Gb Ethernet * 2 x 10 Gb Ethernet *
107 2 x 10 Gb Ethernet * 2 x 10 Gb Ethernet * 2 x 10 Gb Ethernet *
108 2 x 10 Gb Ethernet * 2 x 16 Gb Fibre Channel
109 2 x 10 Gb Ethernet * 2 x 16 Gb Fibre Channel 2 x 16 Gb Fibre Channel
110 2 x 10 Gb Ethernet * 2 x 16 Gb Fibre Channel 2 x 10 Gb Ethernet *
* 2 x 10 Gb Ethernet = 2 x 10 GbE (SFP+) or 2 x 10 GBase-T Ethernet ports
DXi6900 G1: Installing Optional Network Cards in Expansion Card Riser 1
To install the optional i350 or X520 network card in the DXi6900 Node:
Caution: Use appropriate ESD precautions, including the use of a grounding strap, when performing
this procedure.
1. Holding the touch points, lift the expansion card riser 1 from the riser connector on the system board
(see Figure 19 on the next page).