Need help?Do you have a question about the Quantum i8 and is the answer not in the manual?
General| Brand | Quantum |
|---|---|
| Model | i8 |
| Category | Remote Control |
| Language | English |
General safety precautions for operating the R/C system.
Details the AFHDS 2A system, multi-channel hopping, antenna, ID recognition, and low power consumption.
Provides a detailed layout of the transmitter's external components and controls.
Provides an overview of the receiver, including its antenna, status indicator, and connectors.
Provides step-by-step instructions and safety warnings for installing the transmitter battery.
Illustrates how to connect the receiver to servos and other components using specified channels.
Outlines the steps to safely power on the transmitter and receiver system.
Explains the procedure for binding the transmitter and receiver if they are not pre-bound.
Details essential pre-flight checks to ensure all systems are functioning correctly and safely.
Guides users on how to switch between different stick modes for personalized control.
Describes the calibration process for sticks and knobs after mode switching or if accuracy is compromised.
Explains how to set the initialization position for the throttle trim on motor-driven models.
Provides the correct procedure for powering off the transmitter and receiver system safely.
Details how to change the sequence of channel signal output from the transmitter.
Explains how to reverse the direction of specific channels for servos mounted unconventionally.
Guides on updating the transmitter's internal software using a PC and USB cable.
Lists the technical specifications for the receiver unit, including channels, protocol, and dimensions.
Lists the technical specifications for the transmitter unit, including model type, RF, battery, and dimensions.
To Next Page
