Before You Begin
Your Quantum Networks’ Access Point can work in “Standalone Mode” or can be
managed by “Cloud Controller”.
To manage Access Point by “Cloud Controller”, please follow step 5 first and then step 1.
For “Standalone Mode”, continue with step 1.
Package Contents
• Access Point
• Quick Setup Guide
Prerequisites
Internet access
Desktop / Laptop / Handheld device
802.3af / 802.3at PoE Switch / PoE Injector
Connect Access Point
After unpacking Access Point, connect it to internet source
Plug in Ethernet cable of Access Point
Power on Access Point by using 802.3af / 802.3at PoE Switch / PoE Injector
Note: Access Point must have internet access during initial setup for the first time to activate
the device, warranty and support.
To Next Page
Loading...