EasyManua.ls Logo

Quantum QN-I-220 - User Manual

Quantum QN-I-220
18 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Quick Setup Guide
Model: QN-I-220
Command Line Interface Guide
Models: QN-I-200, QN-I-220, QN-O-230
Question and Answer IconNeed help?

Do you have a question about the Quantum QN-I-220 and is the answer not in the manual?

Quantum QN-I-220 Specifications

General IconGeneral
BrandQuantum
ModelQN-I-220
CategoryWireless Access Point
LanguageEnglish

Summary

Glossary of Terms

Management Mode Definitions

Defines Standalone and Cloud Controlled management modes for devices.

Operation Mode Definitions

Explains Bridge and Router operation modes for device connectivity.

Quantumrudder Definition

Describes Quantumrudder as a cloud hosted controller for device management.

Before You Begin Setup

Package Contents Overview

Lists the items included in the package for the access point setup.

Prerequisites for Setup

Details the required items and access for setting up the device.

Connecting the Access Point

Instructions for physically connecting the access point to the network and power.

Step 1 - Basic Setup

Step 2 - Check Device Info and Firmware

Step 3 - Setting Up Device IP Address

Step 4 - Access Point Quick Setup in Standalone Mode

Bridge Mode Configuration

Configure WLAN (SSID) parameters for the Bridge operation mode.

Router Mode Configuration

Configure WLAN (SSID) and Local subnet parameters for Router mode.

Step 5 - Access Point Quick Setup in Cloud Controlled Mode

Cloud Controlled Bridge Mode

Configure WLAN (SSID) parameters for Bridge mode in cloud environment.

Cloud Controlled Router Mode

Configure WLAN (SSID) and Local subnet for Router mode in cloud environment.

Step 6 - Create Quantumrudder Account

Reset Access Point to Factory Defaults

Access Point Default Login Details

FCC Compliance Statement

Related product manuals