26 Installing TLS Certificates on the SKM Server for Pre-SKM 2.4 (240Q)
Quantum Scalar Key Manager 2.5 Quick Start Guide
7 Press <Enter> to continue.
The list of SKM Admin Commands displays.
8 At the command prompt, enter d to Display/update TLS communication
certificates.
The Display/update TLS communication certificates menu displays.
9 Using SFTP, transfer the Quantum certificate bundle file or your own certificates to
the /home/akmadmin/certs directory on the SKM server. Be sure to move the
appropriate bundle; there is a primary bundle and a secondary bundle.
10 At the command prompt, enter one of the following:
• If you used the -d or no -d option: i (to Install user provided
communication certificates
)
OR
• If you used the -q option: a (to Apply Quantum-provided communication
certificate bundle
).
Note: The Quantum certificate bundle is located on the
Scalar Key Manager VM
Installation CD
and has the file name QKMCertXXXXXXX.tgz (XXXXXXX is
a unique combination of letters and numbers).
11 Once you have transferred the files, press <Enter>.
A list of the certificate/bundle files currently in the /home/akmadmin/certs
directory displays (
Figure 11 shows an example).
Figure 11 Example of
Quantum Certificate Bundle
Displayed on Screen
12 Type the file name of the appropriate certificate/bundle and press <Enter>. If you
are installing your own certificates, follow the onscreen instructions to load all three
certificates.
The certificates are installed.
13 Press <Enter>.
14 At the Command prompt, type q and press <Enter> to exit to the Display/update
TLS communication certificates menu.
15 At the Command prompt, type q and press <Enter> to quit, save your changes,
and restart the SKM key server. This process takes a few seconds.
Note: You MUST quit at this point. Otherwise the server will remain stopped and
you will not be able to continue the configuration process on the library.
To Next Page
Loading...
Need help?
General
