Quantum Scalar i3 User Manual

Installing TLS Certificates on the SKM Server for SKM 2.4 (240Q) or Later 35
Scalar Key Manager 2.5
13 When prompted, enter and re-enter a password that will be used during the pk12
file generation.
A message informs you when certificate generation is complete. The location of the
certificates (
/home/akmadmin/generatedcerts) is also provided.
14 Complete the process by loading the certificates onto the SKM servers and tape
libraries using the procedures described in the user’s guide for the applicable
libraries.
• For the Scalar i40/i80, refer to “Importing Encryption Certificates” in the Scalar
i40 and Scalar i80 User’s Guide
.
• For the Scalar i2000/i6000, refer to “Step 3 — Installing TLS Communication
Certificates on the Library” in the
Quantum Scalar i2000/i6000 User’s Guide .
• For the Scalar i3, refer to the topic “Load Certificate - Encryption” in the Scalar i3
Documentation Center: http://qsupport.quantum.com/kb/flare/content/
Scalar_i3/docCenter/Encryption_Load_Certificate.htm
• For the Scalar i6, refer to the topic in the Scalar i3 Documentation Center: http:/
/qsupport.quantum.com/kb/flare/content/Scalar_i6/docCenter/
Encryption_Load_Certificate.htm

Quantum Scalar i3 Specifications

General

Dimensions (WxDxH)	441 x 924.5 x 131 mm
Media type	Tape Cartridge
Form factor	3U
Product type	Storage array
Product color	Black
Storage media types supported	LTO-6
Operating temperature (T-T)	16 - 35 °C
Operating relative humidity (H-H)	20 - 80 %