Quantum Scalar i500 Quick Start Guide

30 Installing TLS Certificates on the SKM Server for SKM 2.4 (240Q) or Later
Quantum Scalar Key Manager 2.5 Quick Start Guide
3 Complete the process by loading the certificates onto the SKM servers and tape
libraries using the procedures described in the user’s guide for the applicable
libraries.
• For the Scalar i40/i80, refer to “Importing Encryption Certificates” in the Scalar
i40 and Scalar i80 User’s Guide
.
• For the Scalar i2000/i6000, refer to “Step 3 — Installing TLS Communication
Certificates on the Library” in the
Quantum Scalar i2000/i6000 User’s Guide .
• For the Scalar i3, refer to the topic “Load Certificate - Encryption” in the Scalar i3
Documentation Center: http://qsupport.quantum.com/kb/flare/content/
Scalar_i3/docCenter/Encryption_Load_Certificate.htm
• For the Scalar i6, refer to the topic in the Scalar i3 Documentation Center: http:/
/qsupport.quantum.com/kb/flare/content/Scalar_i6/docCenter/
Encryption_Load_Certificate.htm
Names of the files to copy are listed on the final screen that informs you that
certificate generation is complete.
After you finish loading the certificates onto the SKM servers and tape libraries,
return to this guide and proceed with the steps in
Configuring Your Library For SKM
on page 38.
4 (Optional) If desired, you can verify the certificate details by running the ls -R
generatedcerts/
command.

Quantum Scalar i500 Specifications

General

Form Factor	Rack-mountable
Product Type	Tape Library
Weight	Varies by configuration
Power Consumption	Varies by configuration
Drive Support	LTO-8, LTO-7, LTO-6
Management	Web-based remote management
Drive Type	LTO Ultrium
Supported Media	LTO-5, LTO-6, LTO-7, LTO-8
Operating Temperature	10°C to 35°C
Humidity	20% to 80% (non-condensing)
Interface	SAS