Quantum Scalar i500 Quick Start Guide

Installing TLS Certificates on the SKM Server for SKM 2.4 (240Q) or Later 37
Scalar Key Manager 2.5
2 Onscreen messages provide status as the Quantum certificate bundles are generated
using the default values, so no user input is required. (The generated bundle files are
saved at
/home/akmadmin/generatedcerts/qbundles.)
After bundle generation is complete, load the bundles listed on the screen onto the
library and SKM servers using the user interface.
•The TapeLibraryQKMCert_xxxxxxxxxx.tgz bundle may be loaded onto any
library attached to the SKM server pair.
•The QKMPrimaryServerCert_xxxxxx.tgz bundle must be loaded onto the
primary SKM server.
•The QKMSecondaryServerCert_xxxxxxx.tgz bundle must be loaded onto the
secondary SKM server.

Quantum Scalar i500 Specifications

General

Form Factor	Rack-mountable
Product Type	Tape Library
Weight	Varies by configuration
Power Consumption	Varies by configuration
Drive Support	LTO-8, LTO-7, LTO-6
Management	Web-based remote management
Drive Type	LTO Ultrium
Supported Media	LTO-5, LTO-6, LTO-7, LTO-8
Operating Temperature	10°C to 35°C
Humidity	20% to 80% (non-condensing)
Interface	SAS