Scalar i500 Getting Started Guide 21
Step 8: Run the Library
You are now ready to start using your library. For information about using your library, see “Running the
Library” in the Scalar i500 User’s Guide. See also the library’s online Help. To access the online Help
system, click the Help icon at the top right of the web client or operator panel user interface.
Note
You can download the latest drivers from: www.quantum.com.
Note
The maximum number of expansion modules supported in a library depends on
the level of firmware the library is running. The latest firmware must be installed
on the library if you are upgrading from a 5U, 14U, 23U configuration to a larger
configuration. The latest firmware can be found at www.quantum.com
.
To Next Page
Loading...
