Quantum Scalar i6000 Replacement

Quantum Scalar i6000: Drive Replacement
6-67999-01 Rev A
October 2013
Update the Drive Firmware Using Firmware Images 9
3 Click Yes.
4 From the Update Drive Firmware screen, ensure the option selected in the
Update Method area is set to Firmware Image.
5 Click the check box next to the replacement drive.
6 Compare the four digit firmware level you wrote down earlier with the four
digit firmware version listed in the Firmware column of the selected drive. If
they match, go to step 12. If not, continue on to step 7.
7 From the Select Firmware File drop-down menu, select the firmware image
you want to install.
The drop-down list includes all drive firmware images that are currently
stored on the library, regardless of drive type. Be careful to select a drive
firmware image that is compatible with the type of drive that you want to
update. See the library's Release Notes for compatibility information or
contact Quantum technical support.
For details on downloading drive firmware, see Chapter 15, Maintaining
Your Library - Maintenance Actions in the Scalar i6000 User’s Guide.
8 Click Start. A warning dialog box displays stating the operation cannot be
canceled.
9 Click Yes. The library automatically logs off other users so they cannot
perform library operations while the drive firmware update is in progress.

Quantum Scalar i6000 Specifications

General

Form Factor	Rack-mountable
Interface	Fibre Channel, SAS
Product Type	Tape Library
Cooling	Redundant cooling fans
Dimensions	Varies by configuration
Weight	Varies by configuration
Operating Humidity	20% to 80% non-condensing
Scalability	Scalable
Drive Types	LTO
Redundancy	Redundant power supplies
Management	Web-based management
Tape Technology	LTO
Supported Media	LTO Ultrium 9, LTO Ultrium 8, LTO Ultrium 7, LTO Ultrium 6
Power Supply	Redundant power supplies
Non-operating Humidity	5% to 95% non-condensing