Quantum Scalar i6000 Quick Start Guide

QUANTUM SCALAR I6000 & SAFENET KEYSECURE QUICK START GUIDE 14
Step 3: Create a Server Certificate on the KeySecure
To create a server certificate, you must create a certificate request and sign it with the local CA:
1 Navigate to the Create Certificate Request section of the Certificate and CA Configuration page
(Security
>> SSL Certificates).
2 Enter the Certificate Name, Common Name, Organization Name, Organizational Unit Name,
Locality Name, State or Province Name, Country Name, Email Address, and Key Size for the
certificate. The KeySecure supports 768-bit, 1024-bit, and 2048-bit key sizes.
3 Click Create Certificate Request. The request appears in the list with a status of Request Pending.
4 Select the request and click Properties to access the Certificate Request Information section.

Quantum Scalar i6000 Specifications

General

Form Factor	Rack-mountable
Interface	Fibre Channel, SAS
Product Type	Tape Library
Cooling	Redundant cooling fans
Dimensions	Varies by configuration
Weight	Varies by configuration
Operating Humidity	20% to 80% non-condensing
Scalability	Scalable
Drive Types	LTO
Redundancy	Redundant power supplies
Management	Web-based management
Tape Technology	LTO
Supported Media	LTO Ultrium 9, LTO Ultrium 8, LTO Ultrium 7, LTO Ultrium 6
Power Supply	Redundant power supplies
Non-operating Humidity	5% to 95% non-condensing