QUANTUM SCALAR I6000 & SAFENET KEYSECURE QUICK START GUIDE 12
Warning: If SSKM is not started soon, IP 192.168.15.125 may become stale
SUCCESS: Configured network interface with ip=192.168.15.125,
netmask=255.255.255.0 and interface=eth0
Start SSKM now? (y/n): y
SUCCESS: SSKM Started OK
Note: The SSKM can only be started when the HSM is initialized. If you defer the HSM initialization,
you can configure the SSKM interface, but you must start the SSKM after initializing the HSM. To start
the SSKM use the you cannot start the SSKM, though you can configure it.
At this point, you’ve given the installation program everything it needs.
The KeySecure creates a DSA key, an RSA key, and a Web Admin certificate. These keys are used to
authenticate the KeySecure to users making SSH and Web Admin connections to the KeySecure.
Because the actual key is fairly large, the KeySecure displays the key fingerprint on the console.
Creating certificate for Web administration server...
Creating certificate for signing logs...
Creating SSH host keys...
SSH RSA key fingerprint:
2048 41:63:d3:ca:c9:ea:1f:f7:a1:84:8b:05:b4:a6:3b:64
SSH DSA key fingerprint:
2048 1d:04:d7:02:60:d5:f2:11:30:12:0a:d9:bb:19:c2:fe
Webadmin certificate fingerprint (SHA-256):
1024 ad:8b:9f:79:5f:de:88:a0:89:36:d6:51:cd:0a:7f:ff:
d3:88:cd:7a:4a:f0:95:b8:21:b7:19:21:3c:71:39:c1
Initializing the key store. This could take several minutes.
waiting for the server to shut down.... done
server stopped
Starting services...
The Web-based Management Console will now be available at this URL:
<https://192.168.15.25:9443>
This device has now been configured.
Press Enter to continue.
Tip: To prevent a “man in the middle” attack when connecting to the KeySecure, we recommend that
you write down these fingerprints and compare them with what is presented when you connect to the
KeySecure via SSH or HTTPS.
19 At the end of this configuration process, setup is complete and you can log into the KeySecure via
the Management Console or the CLI.
YourDevice login: admin
Password: ******
YourDevice#
Use your admin username and password to log in to the system.
To Next Page
Loading...
Need help?
General
