1. GENERAL SETUP
1.1 TV TYPE - Color system of the TV selecting.
1.2 TV DISPLAY - It is for selecting TV output mode.
Options: Normal /PS: Pan & scan mode
Normal/ LB: Letter box mode
Wide : 16:9 wide screen mode
1.3 ANGLE MARK - It is used to select whether or not the multi- angle icon is display on
screen when a Multi-angle disc is playing.
Options: On: Icon will be displayed
Off: Icon will be turned off
1.4 OSD LANG - It is used to choose the desired language for different user. In this player,
you can choose English or other languages.
1.5 CAPTIONS - It is used to switch the caption ON/OFF when playing disc.
1.6 SCREEN SAVER - When the player is not in use for 5 minutes, screen saver will display
on the screen.
Options: On: Screen saver is enabled
Off: Screen saver is disabled
1.7 DEFAULT - It is used to reset to factory settings.
2. AUDIO SETUP
2.1 Speaker setup-It is to set the speaker output levels
Options:LT/RT -Left/Right mix mode.
STEREO-Select this option if you do not have a 2.1 channel amplifier
V SURR -surround -It is used to set dummy surrounding audio effectiveness.
2.2 EQUALIZER SETUP - It is used to compensate for frequency distortion to improve its
frequency response in audio systems(not applicable).
Options: EQ TYPE. In this option you can choose different EQ TYPE.
BASS BOOST. In this option you can set it to ON or OFF
SUPER BASS: In this option, you can set it to On or OFF.
TREBLE BOOST: In this option,you can set it to On or OFF.
To Next Page
Loading...